2021-02-21 19:36:35

Hi guys, just picked up a Behringer Xenyx Q502USB mixewr the other day, I also bought an ATR2100. After unboxing the mixer I got it all hooked up and working, the only problem I'm having is that people can here my computer when my headphones are plugged into the mixer. Does anyone no how to fix this?

I was raised in hell
I made it out by myself
I was raised to bleed
Bad blood runs wild and free

Thumbs up

2021-02-21 21:51:52 (edited by the_ruler_of_dark_forces 2021-02-21 21:53:41)

I don't have the mixer at hand right now, but basically there are three switches. The upper most is the phantom power, the middle one is "to phones" and the lower most is "to main mix". So you should have the main mix switched off and to phones on. The thing with it is that you won't hear your microphone through your headphones this way, but at least others won't hear your computer.
Also, the sound of the main mix leaks just a little bit to the phones this way, but fortunately it doesn't leek the other way around.

Thumbs up

2021-02-21 22:07:12

K, I set my main mix to off and my 2phones on, the problem is that they can't here my speech and I don't here  it eether.

I was raised in hell
I made it out by myself
I was raised to bleed
Bad blood runs wild and free

Thumbs up

2021-02-21 22:23:31

Zenix q502 is one-way traffic over usb. It's either system audio or hte main mix, no in between. This is not a loopback mixer. If you want one of those, you'lll need something from the Soundcraft Signature series.

I'm the only adventure at c: master hahahaha I have unlocked just about everything!

Thumbs up

2021-02-22 13:53:41

If you are looking for a loop back mixer check this out. https://www.sweetwater.com/store/detail … -interface

Thumbs up

2021-02-22 16:22:40

That doesn't apear to have physical knobs for controlling the board, though. Soundcraft Signatures do as they are pure analog mixers.

I'm the only adventure at c: master hahahaha I have unlocked just about everything!

Thumbs up