2018-06-11 09:20:09

Then when you have the doors closed and you are in hte parking position,  press control w and it will tell you on which gate to go to.

2018-06-12 17:41:47

Hello
thank you for your reply, I managed to board passengers, and successfully take off.
However I messed up while landing:p.
I will just give it another try...
Thanks once again.

2018-06-13 00:10:51

Hi,
If you're doing a task and you get diverted to the nearest airport due to bad weather, is it ok to continue onto the next leg of your journey, or do you have to wait it out and go back to the original destination?
Thanks.

Stevie-3

2018-06-13 19:01:56

Hello.
if you get diverted to a diferent airport due to bad whether, you can continue to your destination from the airport you land at.
You Don't have to go back and do it all over again.
Thank you

best regards

2018-06-16 02:30:20

@218 when i change he aircraft it gets stuck on the runway and doesn't allow me to take off i've had it running for like an hour like this. so i dunno what to do

2018-07-30 17:37:21

Hi everyone,
I am having an issue with my transponder. I can turn it on, but every time I press Alt+T to enter the code, I don't get the edit box to type in the code. Any ideas? Thanks.

2018-07-30 18:12:32

Hello.
Make sure that both communication devices are  turned on (transponder control+shift+t, and transmitter control+shift+f.
Also, when you wanna enter the transpode code, make sure your frequency is set to approach, not to ground.
Hope it will be useful.

2018-07-30 18:39:41 (edited by voyager2264 2018-07-30 18:51:24)

Hi,
Thank you for your reply. Both of my communication devices are turned on, both the transmitter and the transponder. I also tried uninstalling and reinstalling the program, but I still had the same effect.

2018-07-30 23:02:07

I know it might be quite difficult, but could you please describe step by step what are you doing? Maybe you've missed something along the way, who knows....

2018-07-31 03:50:19 (edited by voyager2264 2018-07-31 04:16:44)

After opening the hangar door, I fasten my seatbelt and turn on the computer. Then I crank up the plane, release the brakes, and taxi to the parking position. Next, I fill up the plane with fuel, choose my destination, and start turning on the plane's systems. I turn on the transmitter with ctrl+shift+F and turn on the transponder with ctrl+shift+T. I don't contact the tower until I collect the passengers with the help of ground control.
Once I'm at the runway, I shift frequencies by pressing F to get the frequency so that I'm connected to the air control tower. It gives me the code and I press alt+T to enter the code, but my computer doesn't do anything when I press alt+T. I hope I described what steps I take well enough. Hope this helps. smile

2018-07-31 06:34:30

That's really weird. Do you have another computer to check if it's doing the same?

2018-07-31 16:02:13

Unfortunately, no. I only have one Windows computer.

2018-07-31 23:36:49

Since this is the only malfunctioning hotkey which you have discovered yet, maybe its a problem of your keyboard or keyboard settings.
Have you already tried other alt-only hotkeys in Eurofly? For example, do the hotkeys alt+b or alt+c work? When pressing one of them repeatedly you should hear "on" respectively "off"
Or, if you use an airplane of category 3, alt+r should pop up the "enter speed"-dialogue. Does one of them work?

Regards!

-------------

What's yours is mine and what's mine is mine too
If you shake my hand better count your fingers  (Megadeth)

2018-08-01 18:57:58

No, none of the Alt hotkeys work.

2018-08-02 22:14:14

Please, how to create tasks in Eurofly? I've heard, that somebody made some tasks for this flight simulator.

Ja volim samo kafu sa Rakijom.

2018-08-02 22:24:28 (edited by x0 2018-08-02 22:24:48)

Value of company assets is 2147483647 dollars
Integers! Gotta love them!

----------
An anomaly in the matrix. An error in existence. A being who cannot get inside the goddamn box! A.K.A. Me.

2018-08-03 08:18:58

Hi Giovani! If you go to the help center in the Eurofly site, there is a complete and detailed written guide on how to create your tasks and your taskpacks.
Basically, you have to go in the map mode, the, the option after the Free Flight in the main menu; then press alt+shift+T and there will be the task editor; let me know if it helps.
Bye for now

Claudio

2018-08-03 14:45:07

Thank You. I'll look on It.

Ja volim samo kafu sa Rakijom.

2018-08-03 18:24:25 (edited by danielpicard 2018-08-03 18:27:17)

@voyager2264: Do you also have problems using alt-hotkeys in other applications?

-------------

What's yours is mine and what's mine is mine too
If you shake my hand better count your fingers  (Megadeth)

2018-08-03 20:39:59

No. Just Eurofly.

2018-08-08 11:04:39

Hi, I haven't posted anywhere in this forum for a long time, but I'm stuck on a task that I do not know how to complete.
Task 3-4, take the German Chanceler from Berlyn to Athens Griece, but you may not enter Montenegro, Slovenia, Massidonia or croatia. I'm not sure how one can even do that as all of those countries are close together.
As a second disadvantage, I was never good at Geography and thirdly I live in Africa, so have no concept of how to avoid certain European countries.
I tried googling how I can avoid those 4 countries when flying from Germany to Griece, but Google wants to give me google maps, which I can't use.

To know, and not to do, is not to know.

2018-08-08 18:32:16

does anyone have any new tasks they can share?

2018-09-22 18:38:08

Hi, Does somebody know how to fix this error?

Application Error
---------------------------
Exception EAccessViolation in module Eurofly.exe at 006E5F3B
Access violation at address 006E5F3B in module 'Eurofly.exe'. Read of address 00000000.

---------------------------

I have completely removed Eurofly and all the components and reinstalled the whole program.
I also tried to run the eurofly.exe as the administrator but it does not solve the problem.
I granted full rights to eurofly.exe for all my user accounts on my laptop but then I got immediately the application error with a different address, the
program didn't start at all.
I also tried to install Eurofly to different folders, under Program files (X86) and in another game folder which is not under any windows folder. It did
not solve the problem.
Any help would be very appreciated!

2018-09-23 07:01:10

Ah same with my problem

2018-09-27 03:47:04

Hi
I am still having trouble with Eurofly. Even though all communication devices are turned on, the alt+t key still won't let me enter the transponder code. I tried deleting my old game setup for Eurofly and downloading a new one as well as deleting my old US Qwerty keyboard under system settings, but that didn't do any good either. I hope that whatever the problem is fixed soon. I miss playing.