2017-09-15 11:37:10

Hi. I need your help or maybe a tutorial to demonstrate how our blind user use fs pilot? I've installed the shareware version. and I figuring out how to use. any help or audio tutorial will appritiate it. thank you guys

2017-09-15 16:37:43

hello,
go to its website under support, under command reference if i'm not mistaken
then you have the full command list, go to the autopilot panel, press tab until you will focus to a multi-line editbox and write the command there and press enter

2017-09-16 16:21:16

i'm already found the commands. but can i use this fspilot to do all hecklist? or do i need iyp for that? for me from financial side, I couldn't afford iyp

2017-09-16 16:29:14

and one more thing. what check boxes must I check? and how to set climbing rate? because now my climbing rate is -0 feet per minute. dam. make my plane stall

2017-09-18 06:04:55

hi. can I change the frequency when I tell to contact another tower after taxiing? for example contact 118.8 when you're ready. But I don't know which edit box is for frequency. When I press enter to change the frequency using fsx pilot I still and the ground tower. please guys. help me or just record an audio tutorial to show the newbies how to operate fsx pilot. and also, when I try to search this fsx on youtube all they do is press tab and directly to jump to the exack edit box to change the frequency. any help will apritiated. thank you

2017-09-18 19:30:16

hello
in newer versions they will add that to change com radios, it will change nav1 radio already
you cant complete checklist
you also must use this to set climb rate:

set desc 1500

which sets your climbing rate to 1500 feet per minute
also negative numbers will make your aircraft descent
the problem of stalling is because your airspeed is low or your climb rate is high

2017-09-19 05:01:37

ok. I have updated to 2.6. but still can't change the com. I don't know why. and also you said it can do all checklist. what's the command. in the full list of command I don't found any do all checklist command.

2017-09-19 05:04:04

sorry for double posting. erm. how to change those negative numbers? and one more question i wanna ask. what's the diffrent between fsx flight plan and fsx pilot flight plan.

2017-09-19 05:08:10

hello
first, i've said it cant help you complete checklist, it just reads the checklist file, nothing else
second, if you set:

set desc -1500

it will set the climb rate to -1500 feet per minute
this is the difference
negative number is for your descent

2017-09-19 05:17:59

ok understood. another question. when I taxiing, for example taxi to 32r. then it wont stop. how you stop the plane?

2017-09-19 17:53:29

i dont remember the codes, but do this:
first, pull the thrust to idle
i think the code is throttle zero
second, turn your wheelbrakes on
then it'll be stopped

2017-09-20 05:30:56

hi.

visual studio. Thanks for the help. I'll try. but. Should I wait until it says speed set to 0 then activate the weal breaks?

2017-09-20 18:00:43

hi
your answer is yes
after it said "speed set to 0 knots" then do it

2017-09-21 01:32:26

hi. thanks for the help again. visual studio do you have skype? because I have something to ask which is usuitable to ask here because of the policy of the forum.

2017-09-22 10:06:22

hi! i'm back. I have grate news. the grate news is I got the aircraft to the air with fsx. but I not sure. now for example i'm from kuala lumpur airport now i'm at changi airport which is at singapore. I'm following the atc all the way until now i'm contacted johor aproach centre a few ties. now it's circling arround johor and singapore. my question is how to land with this fsx pilot?

2017-09-22 10:14:17

hello again
yes i have skype
my id is amir.ramezani1370
second, we have different kinds of landing, ils, normal short, ultrashort, etc in fsxpilot which all of them have different commands
look at there website to see what are the commands, i dont remember them

2017-09-22 11:38:11

hi. thanks for the help. will keep in touch with on you skype